LUBRICATING
The walking machine has been lubricated before shipment. However, the rubbing between the running belt and the running board greatly affects the service life and performance of the product, so you must add lubricating oil according to the instructions of the machine. When the walking machine has run a distance of 100 miles, a red indicator will appear on the display for lubricating.
Note: Use special lubricant of walking machine or contact our company directly.
LUBRICATING OPERATION
Please make sure to add 10ml of lubricant to the lubrication port when using the product for the first time. Add lubricating oil every 3 months or after 100 miles of working.
- Cut off the seal inside the oil bottle, and cut a small opening on the oil bottle cap (for easy squeezing out oil);
- Turn up the oil filler plug;
- Adjust the machine speed to 0.6 mph. Align the bottle opening to the lubricating guide hole and properly squeeze oil by about 10ml each time;
- After adding silicone oil, run the machine for about 3 minutes. When the silicone oil covers the running belt evenly, press the key on the remote control (or the key on the instrument) STOP to stop it. Then press the “+” key on the remote control for 10 seconds (or press the “+” and 6 keys on the keyboard simultaneously for 10 seconds) to remove the lubricating LED icon. The lubricating is completed.
Note: Be careful during lubricating operation. Do not touch the moving parts.
https://manuals.plus/urevo/ur9tm0011-2-in-1-under-desk-treadmill-manual#ixzz7rAycDW4U